Valor do tratamento
Solução de limpeza desinfetante Sterilex Ultra 1 (Solution 1) and Solução Ultra Activator da Sterilex (Solution 2) are designed to enhance an existing sanitation program and solve the most difficult sanitation challenges. Implementation of a comprehensive program with Sterilex liquids has proven to eliminate positives on food contact surfaces, treat harborage niches, kill biofilm bacteria and remove biofilm.
Shock Treatment (Initial Treatment)
When beginning use of Solution 1 e Solution 2 at a plant, it is important to implement a shock protocol before backing off to maintenance treatments. A shock treatment should also be used whenever a plant has an increase in counts, a new “hot spot” or experiences a sudden decrease in product shelf life.
A shock treatment with Solution 1 and Solution 2 involves 3–5 consecutive applications.
Maintenance Treatment (Weekly)
Following a successful shock treatment, plants can begin to experiment with use frequencies while continuously conducting environmental monitoring to determine a proper/necessary Sterilex use protocol.
In general, Solution 1 e Solution 2 should be used at least 3X/week in RTE or more highly sensitive environments and at least 1X/week in other areas.
Food Contact Surfaces Usage Protocol
- Refer to the SDS for proper safety protocols and recommended PPE.
- Foam all surfaces in the plant with a chlorinated caustic detergent or general purpose cleaner, followed with a water rinse.
- Prepare solution of Solution 1 e Solution 2 mixed at a 1:1:10 ratio (12.8–16 oz of each solution/gallon of water) for use in a high volume, rinsed tank foamer. Once mixed, the solution MUST be used within 8 hours.
- Generously foam all overheads, walls, equipment, floors and drains to ensure thorough coverage. Allow chemistry to soak in all crevices of treated surfaces. | Minimum contact time: 10 minutes
- Rinse all surfaces thoroughly with a potable water rinse.
- Apply a no-rinse food sanitizer to all food contact surfaces.
Notas de uso
A Sterilex recomenda o uso dos produtos em até 8 horas após a mistura. Se uma mistura precisar ser usada após 8 horas, use o kit de teste para garantir a concentração adequada do ingrediente ativo. Misture a quantidade de solução necessária para a aplicação específica.
