ProvaStride Application Best Practices

Broadcast Applications

1. Pre-measure ProvaStrideTM (EPA Reg. No. 63761-11) according to the formula below. This formula assumes application at the minimum use rate of 2 oz/100 ft². You can double the application rate by using 0.0025 instead of 0.00125 in the formula. Pounds of ProvaStride = Room Area (in ft²)  X  .00125
2. Slowly add ProvaStride to the spreader hopper or application device. It can be applied using either a push behind spreader, handheld spreader or by hand.
3. Walk forward at a deliberate pace (3 mph), and pull the handle to begin application.
4. Apply 2–4 oz of ProvaStride per 100 ft² of floor surface containing no more than 0.97 fl oz of water per ft².
5. ProvaStride should be spread evenly on the floor surface.
6. Floor surface should have a light coating of ProvaStride. Re-apply powder as needed to ensure the concentration maintains a minimum use rate.
7. Fresh powder should be applied when visibly dirty or once floor surface has no more undissolved ProvaStride.

Floor Mats + Foot Pans

1. Apply ProvaStride to mat or foot pan. For easiest maintenance, we recommend applying a 1/4 inch to 1/2 inch layer of powder to the foot pan.
2. Apply fresh powder as needed. Note: Fresh powder should always be applied if powder falls below minimum use rate (2 oz/100 sq ft) or if mat/pan becomes flooded with more than 0.97 fl oz of water per ft².
3. ProvaStride should be spread in the mat/pan to ensure full coverage. Re-apply powder as needed to ensure the concentration maintains a minimum use rate (2 oz per 100 ft2 containing no more than 0.97 fl oz of moisture per ft²).
4. Fresh powder should be applied when the product becomes visibly dirty.